I am so happy I purchased one of these! Pontoon rides are SO much better in every way. All Pontoons should have a 3rd tube. People are seriously missing out! Thank you again.

Mike, wanted to send you a note to follow up on the performance. Before numbers: 3000 rpm / 8.8 mph; 4000 rpm / 15.4 mph; 5000 rpm / 16.2 mph.

After installation: 3000 rpm / 13 mph; 4000 rpm / 19 mph; 5000 rpm / 24 mph. Nice improvement. Very happy with this.Overall, I am happy and would recommend this to other pontoon operators.Thank you!

Hey Mike, I have successfully installed the tube and I am very happy how much more steady and well balanced the pontoon is. It makes a huge difference on the water. The boat is running much better since the addition of the kit. Thanks again for your help

Hey Mike, my wife Sabrina and I got to take it out for the first time last Sunday. I must admit, I feel like I have a new boat. Comes up on plane so fast. Before with the 40hp we hit maybe 14mph. Now it does 30mph and it gets there quick. I love everything the new toon does. Everyone is shocked at the build. I get WOW's all day long. The biggest shock is when I tell them I went from 40hp to 115hp. HOT ROD PONTOON.

Mike- I installed the kit on Saturday- I gained 2MPH 22 to 24- I halved the turning radius- I was now able to handle a full pontoon without taking water in the front gate or having motor cavitation- The pontoon in much more stable and handles big waves with ease- I was able to go 20.5 MPH with a 7 people load and prior I could hardly even try full throttle as I would cavitate with that load as the passenger seating is biased forward.- Now that the pontoon deserves it and can handle it I plan to up the HPThere are hundreds of Pontoons on the lake we run and this is already getting attention.24 foot toon 90 hp

Moved the tube back 5 inches, lowered the Mercury 115 xs Pro command thrust one notch down, and replaced the 3 blade with a 4 blade prop. It is a totally new pontoon, got the rpm back up to 6300 and it is 4 mph faster and handles great. Works perfectly now. Great upgrade. Thanks Mike

Mike, wanted to give you an update on my third toon add on my vintage 2008 Bennington 2275 FSI. This was completed in the Spring and it hit the water early June at Flathead Lake, Montana. The results---the boat sits approximately 6 higher out of the water (no passengers) both front and back (can see this in the side pic in our slip). The ride of the boat is a day and night deal. Much smoother than with the two tubes, no crossing wave splashing like we had before and much better turning response. Overall, the quality of the ride in rough water is phenomenal when compared to the original two tube designwe liked the old boat before but now it is even better. In reality it means we will keep this boat a couple years longer than we had planned before replacing it with a bit more horsepower. As you can see it is in pretty good shape for being 13 years old. Thanks for your help in this project. I am a show me guy and this darn thing works as advertised.

I was looking for a tri-toon but only had found a pontoon with the specifications I wanted for fishing, cruising, and tubing/skiing with grand child. While the steering of a pontoon was like trying to steer a 4x8 sheet of plywood I was looking for something that would change that as I have a slip and lift that is in some tight quarters. After doing some research (in leu of taking a beating in trading in my pontoon for a tri-toon) I found Mike Millers solution to handling and stability. His kit was very straight forward and I put it on with some help from my wife in less than 6 hours. Just be critical on following the instructions with the measurements. Maiden voyage was this weekend and it steered like the Ranger boats that I have had in the past. Pulled right into the slip and onto the lift without the dreaded anxiety of missing the opening especially with slips all around me and boats and pontoons hanging into the main channels.... thanks Mike for resolving an issue that should actually increase the value of my pontoon.

We got the toon installed and took it for a test run at our lake at 5000feet. We gained 400 RPM and 4 MPH. Our Pontoon was 5200 RPM now it's 5600 RPM, and was 19 MPH now 23 MPH. Also, we can trim the motor whereas before it did not make much of a difference. The ride is much smoother now. We are very pleased with the performance improvement. Thanks.

I am looking at adding a third pontoon to my 18' pontoon boat. I have a neighbor with your product on his boat and it works great.

Two of my sons were on the new tri-toon with me this weekend. They were blown away. Sitting higher. Smooth ride through choppy water. Staying dry. Speed. They loved it. Went through 25/30 gallons of gasoline in two days. And it was pretty darn cold outside! The grandkids said it was more fun than driving a dirt bike. Thanks for supplying such a great product.

Hey Mike, I just wanted to write to say thanks. The center pontoon works great! I gained about 4 inches of freeboard, noise is reduced at top speed (electric motor, so not so high), & maneuverability is up. It's a good purchase and value. I'm happy to recommend you and the product or be a reference for anyone considering putting one on their boat in Northern VA.

Went out today...it was great. The engine doesn't need adjustment and our top speed picked up. Runs smooth and sweet. Thanks for your help

Overall, I love it!!! I have the 13'6' kit with the 2x2 extensions

WE ARE VERY PLEASED WITH THE PERFORMANCE OF THE NEW 3TPKM24HD CENTER PONTOON. RAISED THE BOAT ABOUT SIX INCHES FRONT AND BACK.

SHE FLOATS GREAT, THE BUOYANCY IS EXCELLENT NOW

I run a marine sports company all the way out here in the middle of the Pacific on an Island called Saipan. I found Mike's company on a website search and then cross checked his name around the internet. Everyone had great things to write about him and Pontoon Wholesalers! He guided me in telling me what kind of pontoon pieces I'd need to stay afloat and keep my operations humming smoothly. Had lots of options from Mike that ranged in pricing which is what I appreciated. He didn't try to sell me the most expensive thing he had, he tried to tell me what the benefits vs. costs would be and allowed me to think it over. After a few weeks our pontoon pieces came in and my staff was able to install without any problem. Today, our pontoon is an eye-catcher and it's all in thanks to Mike and Pontoon Wholesalers! Thanks for keeping my boat up and out of the water, Mike!

Very pleased with height and stability of the boat!